Thursday, March 24, 2005
How to program the RC200E to read from SmartMedia
In order to program the Celosica RC200E to read from the SmartMedia every time it boots
Use this command
-b Writes an FPGA configuration BIT file to the SmartMedia card.
-l Locical address to write the bit file to
Use this command
rc200cmdftu -b -l 0x00 YourBitFile.bit
-b Writes an FPGA configuration BIT file to the SmartMedia card.
-l Locical address to write the bit file to
# posted by Shaohen @ 6:49 PM 
